BTF Jeep CJ Rear Stretch Kit BTF07031

  • BTF Jeep CJ Rear Stretch Kit BTF07031

$ 210.00   On Sale  $ 299.99

Blue Torch FabWorks,INC is proud to introduce a CJ rear axle relocation kit. This kit is a simple way to relocate your rear axle back about 6 inches to clear larger tires and add much needed wheelbase. Cutting the rear fenders is required for the install of this kit. Included in the kit is a rear bumper, shackle mounts, and two frame side caps. The kit is very simple to install. The kit is designed to work with Jeep XJ rear leaf springs. Gas tank needs to be replaced with fuel cell in a new location. Rear Fenders will need to be cut out to allow room for tire in new location. Rear corner body mounts must be removed to allow room for the tire during suspension articulation. Rear drive shaft will need to lengthened. Brake line must be relocated. Must fabricate new lower shock mounts. Uses a Rancho RS9000 shock. (Part # RS9010) Rear Traction Link HIGHLY RECOMMENDED. *No parts are supplied to make these modifications. Please call if you have any questions. INCLUDED WITH THE BTF CJ2XJ ALXE RELOCATION CONVERSION KIT: One Rear Bumper Assembly with D-Ring Mounts Included andTwo Side Frame Plates (Used to cap off the ends of the formed plate), ***This kit it for the late model CJ's with the dogleg frame. Your frame must measure 38" wide in the rear for this kit to work with your vehicle.***

Type Full Width & Stretch Kits
Vendor Blue Torch Fabworks
Tags Full Width & Stretch Kits

Other fine products...